Congratulations on your purchase of the Team Issue goggle package! To maximize your enjoyment and extend the life of your goggles, please follow these instructions:
- REMOVE THE PLASTIC PROTECTIVE FILM FROM THE BACK OF THE LENS BEFORE USE
- Gently squeeze the top and bottom of the frame together to release the lens from the magnets on the frame
- Remove the lens from the frame, handling the lens by the edges
- Replace the lens by holding the lens about 1 inch over the frame and releasing onto the frame. Seat the lens into the frame and corner slots by gently pushing the frame around the lens. Check to see the lens is secured by the corner tabs
- Adjust the buckles on the strap to provide a firm yet comfortable fit on your face. The dual adjusters provide symmetrical pressure points for all day comfort
- Use only a microfleece on the lens. Do not rub the inside of the lens with a finger or glove, use only a mild soap / water or lens cleaner with microfiber cloth to prevent damaging the lens surface and coatings
- Clean the vents after a fall or snow accumulation by gently brushing the snow off with your fingers/glove so the goggle can breathe
- Always store your extra lens in the microfiber pouch to prevent scratching
- The hard-shell protective case can be cleaned with dish soap/ water , then air dry.
NOTE- DO NOT CHANGE YOUR LENS ON A CHAIR LIFT OR SURFACE LIFT TO PREVENT LOSS OF A LENS.
